SIZE GUIDE

 

If you’re unsure of your size, don’t worry — you can easily measure at home using one of the two methods below.

 

Option 1: Measure Your Finger

 

This method works best if you don’t already have a ring that fits the intended finger.


What you’ll need:

  • A thin strip of paper or a piece of string
  • A pen
  • A ruler (millimetres preferred)


Steps:

  1. Cut a strip of paper about 8–10 cm long.
  2. Wrap it around the base of the finger where you plan to wear the ring.
  3. Make sure it sits snugly but comfortably — not too tight.
  4. Mark the point where the paper overlaps.
  5. Lay it flat and measure the length in millimetres.

 

This measurement is your finger’s circumference.

Use the chart below to match your measurement to the correct Golden Aur / US ring size.

 

Option 2: Measure a Ring You Already Own

 

If you have a ring that fits perfectly on the desired finger, this method is quick and accurate.


Steps:

  1. Choose a ring that fits comfortably.
  2. Place it on a flat surface.
  3. Measure the inside diameter straight across the centre of the ring (from inner edge to inner edge).
  4. Compare the diameter measurement with our size chart above to find your US size.


 

 

ⓘ Helpful Sizing Tips


For the most accurate fit, keep these points in mind:


  • Fingers can swell or shrink depending on temperature. Measure when your hands are at a normal, comfortable temperature.
  • Your dominant hand is often slightly larger than your non-dominant hand.
  • Measure at the end of the day when your fingers are at their largest.
  • If your measurement falls between two sizes, choose the larger size for comfort.
  • Wider bands tend to fit more snugly — consider sizing up slightly if choosing a thick ring.
  • If your knuckle is wider than the base of your finger, measure both and select a size in between.